Color Mode or State
Olive Local Site Trunking Mode
Yellow Call Out — Standby
Red Call Out — Alert
Green Call Out — Accepted
Grey Radio User Assignment (RUA) — Limited service
Status Icons
Status icons appear when your radio is engaged in certain activities or when you have activated certain features.
The icons can appear in normal or large size. To manually enable/disable large status icons, go to Menu → Setup →
Display → Extended Status Icons.
Table 16: Status Icons
Icon Description
Trunked Mode Operation
In Service
No Service
Signal Strength – The more bars, the stronger the signal.
RF Power — Indicates the High RF Power is enabled. Shows the signal strength. The more
bars, the stronger the signal.
Migration — Displayed when your radio is registered to the foreign network.
Broadcast Call — Displayed when the radio is in the Broadcast Call.
Scan — Indicates talkgroup scanning is activated in the radio.
Data Connected — Displayed when the data connection is idle (standby).
Data Transmit/Receive — Displayed when the data connection is active. Number 1, 2, 3, or
4 indicates how much bandwidth is used during transmission (25%, 50%, 75%, or 100%).
Direct Mode Operation
Direct Mode Call — Displayed when the radio is receiving a Direct Mode call. The more
bars, the stronger the signal.
or
High RF Power: idle or transmitting — Displayed when the High RF Power option is ena-
bled and the radio is either in the idle mode or transmitting a call.
High RF Power: receiving — Displayed when the High RF Power option is enabled and the
radio is receiving a call.
Table continued…
76 | Man-Machine Interface
Send Feedback | |
To Next Page
Loading...
