EasyManua.ls Logo

Motorola MTP830 S - PIN Protect

Motorola MTP830 S
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Radio Info
Depending on the codeplug configuration the manufacturer, type, and serial number information is available. The
information is available through the service page accessible from the MMI.
The Radio Info provides the following data:
Manufacturer
Model Number
Note: The manufacturer and model number information is displayed only on radios distributed under
Motorola trademark.
Release Name – the version of radio software.
ISSI – the ISSI which is currently in use. If a SIM Card is present the ISSI is read from the card, otherwise it is
taken from the codeplug.
TEI – the TEI is displayed as a hexadecimal number.
Serial number – Motorola serial number is displayed only on radios distributed under Motorola trademark.
OPTA – if the BSI SIM support is disabled, no OPTA information is displayed.
Hardware Test
This mode allows performing basic hardware tests and share the results immediately on the display.
Note: The hardware test mode is only for use by authorized persons.
Use the following key combinations to access the hardware test: LEFT, SPEAKER CONTROL key (hold all simultaneously)
and then press ON/OFF key..
Man-Machine Interface | 87
| | Send Feedback

Table of Contents

Other manuals for Motorola MTP830 S

Related product manuals