Annotation Description
Used with the digital car kit to connect the RF signal to the external antenna.
15 DISPLAY
Provides alphanumeric text and images within 65,536 colors and 130 x 130 pixels with
backlight, scalable fonts, and contrast.
16 SIDE CONNECTOR
Used to connect accessories and for programming.
17 MENU key
• From the home screen, press to enter the main menu.
• Used to enter the context-sensitive menu.
18 ON/OFF/END/HOME key
• Press and hold to turn on/off your radio.
• Press to end calls.
• Press to return to the home screen.
19 NAVIGATION key
Press up, down, left or right NAVIGATION key for list scrolling, while moving around the
menu hierarchy, or for alphanumeric text editing.
From the home screen, press to activate one of the following:
• down NAVIGATION key — enters Recent Calls menu item.
• up NAVIGATION key — changes My Groups talkgroup folder.
• left and right NAVIGATION key — toggles through the talkgroups.
20 BACKLIGHT SENSOR
Your radio keypad can be illuminated whenever the backlight is on. The keypad backlight
sensor determines whether there is a need to light up the keypad backlight, by measuring the
ambient light intensity. This feature can improve power saving. When the radio is in the bat-
tery charger, the keypad backlight remains illuminated and the BACKLIGHT SENSOR is ignored.
21 BOTTOM MICROPHONE
Note: A detailed list of compatible accessories is included in Accessory Leaflet, part number:
68015000601. To obtain the document, contact your service provider.
Software Keypad
The software keypad is an alternative entry method for PIN, PUK, numbers to call, SDS destination number, and
contact names. When the feature is enabled, small letters, capital letters, digits, and special characters can be selected
while being in editors (for example, PIN editor). Additionally the feature enables creating messages and templates,
editing contact names and numbers stored in the contact list.
Note: iTap and autocompletion are not available in this entry mode.
The character selection is available using the navigation key (up and down) and/or by rotating the Rotary Knob.
Using left/right navigation keys users highlight a character for editing. Pressing the right navigation key or the rotary
knob triggers adding a new character at the end of the edited string . To toggle the characters set users press and hold
the right navigation key or press and hold the rotary knob. The following sets are available:
72 | Man-Machine Interface
Send Feedback | |
To Next Page
Loading...
