Motorola MTP850 - Charging the Battery

6
3. Replace the battery.
Charging the Battery
Motorola approved chargers provide optimum performance.
Other chargers may not fully charge your Motorola Lithium-
Ion battery or may reduce the life of the battery.
The MTP850 can be either On or Off during charging.
1. Insert the connector on the charger into the socket at the
base of the MTP850. Select the required plug adapter (UK
or European type) and connect to the charger. Then plug
the charger into a suitable mains socket.
2. The MTP850 displays the Charger Connected message
only if the MTP850 is On when connecting the charger. If
the MTP850 is Off, the display shows an icon of the battery
in charging. Remove the MTP850 from the charger only
when the display goes off.
The Battery icon shows the charging status (see below).
2
1
Empty Full
Empty
Full
Battery Capacity Battery Charge Progress