Motorola MTP850 - Receiving a Group Call; Receiving a Group Call in Idle Screen with Scan Off

49
TMO Group Call
The following screens show examples of how the caller’s
private number (ID 124) is displayed.
Receiving a Group Call in Idle Screen with Scan Off
You can receive a group call from the selected
talkgroup or from the associated ATG only.
Your MTP850 will receive the Group Call.
For incoming call alert, see settings in the Vibrate menu option
(page 126) and the Tones menu option (page 132).
Any incoming Group call is always received through the main
speaker. If configured by your Service Provider, the Audio menu
item allows to setup the audio of the incoming Group Call.
If the setup is Speaker Control, you can direct the audio of an
active group to the earpiece (low audio) or the main speaker
(high audio). In low audio speak into the bottom microphone and
listen via the earpiece. In high audio speak into the top
microphone and listen via the speaker.
At the end of a call which has been directed to the earpiece, an
audio hang timer is activated, if it is enabled by your Service
Provider. Within the preprogrammed hang time, any incoming
call is still received through the earpiece. When the timer
expires, a low pitch tone is emitted alerting you that the next
incoming Group call will be received through the speaker. Upon
hearing this alert, you are advised to hold the terminal at a
comfortable distance away from the speaker.
When receiving a Group call, you will hear a “New Group Call”
tone (if configured by your Service Provider).
Private ID
without alias
Private ID
with alias
Group In Use
ContactName
TG4
Group In Use
ID:124
TG4
Optns Folder
Optns Folder
OR
Group In Use
TG4
ID: David
Optns Folder