3 Select the required network from the list.
4.17.3.4
Using Any TG Net Registration
When and where to use: Your radio has lost its network coverage and wants to increase the number
of networks it can scan and register. If the talkgroup selected is an Any Net talkgroup, this menu
displays all networks allowed for scanning and registration. If the talkgroup selected is an ISI talkgroup,
this menu displays all talkgroup linked networks allowed for scanning and registration.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks → TG Net Sel → Any TG Net.
Your radio selects and registers to the network automatically from the predefined list.
4.18
Location
NOTICE: This feature is a paid feature.
This sub-menu allows you to enable the GNSS, change GNSS accuracy, and view your position and
testpage.
See Global Navigation Satellite System (GNSS) Location Service on page 141.
4.18.1
Enabling GNSS
Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Interface.
3 Select On.
NOTICE:
Your service provider can enable this feature.
4.18.2
Viewing Your Position
Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Position.
3
Scroll to view the results about the last time your location was calculated.
NOTICE:
To refresh your position:
• Select Position — the radio refreshes its position automatically
• Press Refresh
MN002033A01–AC (en-US)
Chapter 4: Main Menu
Send Feedback 127
To Next Page
Loading...
