Chapter 2
Getting Started
This chapter contains basic information on how to use the radio.
2.1
Product Technical Information
Table 2: Product Technical Information
Description Value
Maximum Voltage
8.0 V
Maximum Current
2.5 A
Maximum Speaker Load
1.3 W at 16 Ω
Antenna Impedance
50 Ω
Operating Temperature
Range
-20 °C to +55 °C
Storage Temperature
Range
20 °C to 30°C
Ingress Protection Rat-
ing
IP67
Audio Power Through
the Radio and Accesso-
ries
RMS: 2 W
Peak Power: 4 W
Operating Time
Duty Cycle
05/35/60 12 h
Enhanced Data Transfer
Hardware ready for TETRA Enhanced Data Service (TEDS)
NOTICE: 800 MHz models are not hardware ready for
TEDS.
NOTICE:
The system (SwMI) determines radio transmit and receive times, which affect the actual radio
operating time.
If the radio overheats (due to high ambient temperature or other factors), thermal protection will
reduce transmitter power, which may lead to loss of communication.
You can attach a colorful o-ring to a radio antenna to distinguish radios from one another.
An RFID knob is available as an optional accessory which allows tracking radios easily. The
knob contains an RFID tag which can be read by handheld scanners greatly enhancing the
speed of radio identification. The knob is a retrofit option and can replace an existing volume
knob.
MN002033A01–AC (en-US)
Getting Started
Send Feedback 21
To Next Page
Loading...
