2.11.2
Using Low Audio
When and where to use: Placing or receiving a Phone, PABX, or Duplex Private call.
Procedure:
1 Hold your radio as you would a telephone.
2 Speak into the bottom microphone and listen through the earpiece.
Keep the antenna at least 2.5 centimeters from your head and body.
2.12
During the Call
During the call, label of the right Soft key indicates the next possible change. Accessory default setup
is:
Table 8: During the Call
Soft Key Label Audio Setting
Spkr
Audio goes to the main speaker (Speaker HIGH is displayed)
Erpce
Audio goes to the earpiece (Speaker LOW is displayed)
PHF
Audio goes to the Personal Hands Free (Speaker LOW is displayed)
2.13
Entering TMO or DMO Mode
Procedure:
1 From the home screen, press Options.
2 Select Trunked Mode / Direct Mode.
2.14
Selecting Talkgroups
Follow these procedures to select talkgroup manually. If the selected talkgroups is an InterSystem
Interface (ISI) talkgroup, the radio can migrate to another talkgroup linked network, changing the
talkgroup automatically.
Procedure:
From the home screen, use one of the following methods:
•
Press Left or Right Navigation key. Press Select to confirm.
•
Select Options → TG by abc. Enter a talkgroup name and select the talkgroup name from the
list.
•
Select Options → TG by Folder. Select a folder (for example, Favorite) and then a talkgroup
name.
NOTICE:
Your radio can access up to three levels of the folder structure.
•
Press Rotary Knob and rotate it until the required talkgroup name is displayed. Press Select to
confirm.
MN002033A01–AC (en-US)
Chapter 2: Getting Started
44 Send Feedback
To Next Page
Loading...
