Appendix A
Tones
The radio has two tone packs: Classic Tones (default) and New Tones. Your service provider decides
which one is enabled.
To listen to the tone samples, click
NOTICE: Some radio tones are model-specific and may not be available on your radio.
Table 31: Radio Tones
New Tone Classic Tone Tone Description
Default Beep – Played when pressing a key.
Invalid Action
Examples:
• Pressing an invalid key.
• Dialing an invalid number.
• Talk prohibit.
System Notification
Examples:
• The radio changed its status from out-of-range to In service.
• The radio returned to the home network.
• Toggling between the TMO and DMO modes.
System Error
Examples:
• The radio changed its status from In service to out-of-range.
• Call disconnected.
General Notification
Examples:
• Entering Local Site Trunking.
• Entering the Transmit Inhibit Mode.
Positive Notification – Message sending succeeded.
Negative Notification – Message sending failed.
Item Received – A new message received.
Talk Permit – The radio user is allowed to transmit their mes-
sage (after pressing the PTT button).
Clear-to-send – Data transmission ready to begin.
MN002041A01-AH
Appendix A: Tones
166
To Next Page
Loading...
