2.16
One-Touch Buttons
The One-Touch Button (OTB) feature allows you to activate a feature by a long key press of the
programmable button. Your service provider can also assign one-touch functions to the keypad keys.
NOTICE:
You can also assign features to the option buttons of the RSM accessories.
The One-Touch Button and One-Touch Dial are mutually exclusive features.
Table 14: One-Touch Button Features
Feature Description
Activation of Covert Mode Turns Covert Mode on or off.
Add Bluetooth Device Activates scanning for Bluetooth devices.
Any Network Selects any network.
Any Talkgroup Network Selects any talkgroup network.
Bluetooth Smart Proximity
Pairing
Activates scaning for Bluetooth Smart Proximity Pairing.
Change Audio Profile Changes to the specific audio profile.
Change Talkgroup Changes the talkgroup to the one programmed by your service pro-
vider.
Disconnect All Connected
Bluetooth Devices
Disconnects all Bluetooth devices connected to the radio.
Display Bluetooth Generic
Attribute Profile (GATT)
Sensors Battery Levels
Displays the battery levels of all paired Bluetooth GATT-based sen-
sor devices.
Display GATT Service Da-
ta
Displays the GATT-based sensor data.
Display Heart Rate Displays the heart rate value received from the connected GATT-
based heart rate sensor.
Display Operational-Tacti-
cal Address (OPTA)
Displays the OPTA.
DMO Pre-emptive Short
Data Service (SDS)
Sends the next DMO SDS or status message with elevated priority.
Flip Display Rotates the display by 180°. Flip Display is the default function for
the upper Side button.
Home Only Selects only home network.
Home Talkgroup on Home
Network
Selects only home network and home talkgroup network.
Inactive One Touch Key O The one-touch function assigned to the 0 key remains inactive until
you long press the button twice.
NOTICE: A single long press on the 0 button calls out the
+ symbol.
Initiate Call-Out Fallback Sends a Call-Out Fallback Alert.
MN002041A01-AH
Chapter 2: Getting Started
51
To Next Page
Loading...
