2.12
During a Call
During the call, label of the right Soft key indicates the next possible change. Accessory default setup
is:
Table 12: During the Call
Soft Key Label Audio Setting
Spkr Audio goes to the main speaker (Speaker HIGH is displayed)
Erpce Audio goes to the earpiece (Speaker LOW is displayed)
PHF Audio goes to the Personal Hands Free (Speaker LOW is displayed)
2.13
Entering TMO or DMO Mode
Procedure:
1 From the home screen, press Options.
2 Select Trunked Mode/Direct Mode.
2.14
Selecting Talkgroups
Follow these procedures to select talkgroup manually. If the selected talkgroups is an InterSystem
Interface (ISI) talkgroup, your radio can migrate to another talkgroup linked network, changing the
talkgroup automatically.
Procedure:
From the home screen, use one of the following methods:
• Press Left or Right Navigation key. Press Select to confirm.
• Select Options → TG by abc. Enter a talkgroup name and select the talkgroup name from the
list.
• Select Options → TG by Folder. Select a folder (for example, Favorite) and then a talkgroup
name.
NOTICE: Your radio can access up to three levels of the folder structure.
• Press Rotary Knob and rotate it until the required talkgroup name is displayed. Press Select to
confirm.
NOTICE: If the Rotary Knob mode is set to Scroll, then you do not need to press it to
enter the scrolling mode.
2.14.1
Talkgroup Icons Selection
Talkgroup icons are used to indicate that a talkgroup has a special function, show the status of network
selection, and/or show the talkgroup properties. A talkgroup without an icon does not have a special
function attached to it.
MN002041A01-AH
Chapter 2: Getting Started
48
To Next Page
Loading...
