Connected your MG7315.
Powered up your MG7315. To do this, the On/Off button needs to be On. Wait for the
green online connection light to stop flashing and remain solidly lit. This may take up
to 15 minutes.
You should have a recent cable bill handy because it has your account number and
you’ll probably need that.
If you’re asked for information about the MG7315, you can find this on the label on the bottom of the
MG7315.
Activate
For some service providers, you activate by calling them. Many service providers including
Comcast and Cox prefer that you activate by opening the Web browser of a computer that’s
plugged into one of the MG7315’s Ethernet ports.
If you don’t have a computer, you can use the Web browser of a Wi-Fi device such as a
smartphone or tablet. In that case, you’ll need the unique Wireless Network Name and Password
printed on the bottom of your MG7315. You’ll use these in setting up your wireless device to
connect to the MG7315. Once you’ve connected, you can open the browser of that wireless
device.
For Comcast XFINITY Users Only:
If the activation page does not appear, please go to www.xfinity.com/internetsetup for more
information and to activate your modem.
Here is a list of phone numbers for some major cable service providers. (Note that this list is
subject to change.)
Comcast – 1 (855) 652-3446
Time Warner – 1 (855) 704 4503
Bright House – 1 (888) 289-8988
Suddenlink – 1 (877) 794-2724
Cable One – 1 (877) 692 2253
Cox – 1 (888) 556-1193
RCN – 1 (866) 832-4726
Once your MG7315 is activated either online or by phone, your service provider will provision your
MG7315 service. Typically this takes less than 5 minutes, but in some cases, this may take 30
minutes or longer to complete.
Try to browse the Web using a device connected via Ethernet or Wi-Fi to the MG7315. If browsing
works, Congratulations! Your MG7315 is working.
If your MG7315 is NOT working, see Troubleshooting Tips below.
Configuration Manager
You may not need to use the Configuration Manager. Here are some reasons for using the
Configuration Manager:
You want to change the wireless router setup. For instance, maybe you’re replacing a router and
want to use your existing Wireless Network Name and/or Password instead of the unique ones
that come with the MG7315.
You want to set up special Internet gaming settings.
You want to set up parental controls including white lists and/or blacklists for certain users and
times.
You want to get performance information about the MG7315 modem and/or built-in router. This
can be helpful in optimizing wireless performance.
If you need to access the MG7315 Configuration Manager, open your Web browser. Type
To Next Page
Loading...
