Get started
Insert the SIM and microSD cards.
To activate phone service, you might need to insert one or two SIM cards, or this may
have been done for you. You can also add a microSD card, which is optional and sold
separately.
Insert the cards
Caution: make sure you use the correct size SIM card and don't cut the SIM card.
SIM card insert graphic. After the battery is removed, the SIM card is inserted in the slot on the left with the clipped corner to the upper left. The SD card is inserted in the right slot.
Nano SIM
SIM2
SIM1
Push the tray back into your phone.
Insert the nano SIM and memory cards.
Insert the SIM cards with the
gold contacts facing down.
Insert an optional microSD
card (sold separately).
Insert the SIM tool into
the tray hole to pop
out the tray.
Caution: handle the
tray with care to avoid
bending.
SIM
One SIM card:
Two SIM cards:
Charge up & power on
Charge your phone fully and turn the power on. Follow the screen prompts to get
started.
Battery in and power on graphic. Put the battery back in top down first and snap the cover on. After you charge the phone, press and hold the Power button until the screen lights up.
Power on.
Press & hold Power until
the screen lights up.
Before using your
phone, fully charge it
with the charger
provided.
Charge up.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
