59
basics
voice commands
You can use voice commands to make calls,
and to open and use some phone
applications.
Note:
Not all phone languages support voice
recognition and voice commands.
open applications
To open a call a contact, send a text message,
look up contact information or open a
program:
1
Press and hold the voice key for 2
seconds.
Your phone prompts you to say a
command.
2
Say one of the following commands:
•
“Call <contact name or phone
number>”
•
“Send text <contact name>”
•
“Look up <contact name>”
•
“Open <program name>”
Your phone will respond to the request by
making a call, opening a text message
screen, open the contact information for
requested contact, or open the program.
Tip:
Speak numbers at a normal speed and
volume, pronouncing each digit distinctly.
Avoid pausing between digits.
Notes:
•
Your phone may prompt you to repeat a
name or number. If the name/number
isn’t valid, the phone doesn’t make the
call.
•
If the phone does not recognize the
name or number, the display shows a
list of names/numbers, asks, “Did you
To Next Page
Loading...
