Motorola RAZR MAXX Personalization Guide

Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
(Volume 1 - Primary Mods)
V3X Personalization Guide-V2-5-eb-v1-061205.doc 148 of 227
ebentley
Troubleshooting:
• I can't get P2Kman to recognize my phone.
o Did all the drivers install properly?
o Did you try restarting your phone and trying it again?
o Did you try restarting your computer and trying it again?
o What type of USB cable are you using? I hope it's a Motorola OEM one.
gnized using that software?
on't notice any difference.
Did you change the correct offset?
to between 00 and 08?
Did you save the gain_table.bin before you uploaded it?
you set the upload path on P2Kman to "/a/"?
Did you use the "PC >>> Phone" button? (Don't use the "Upload seem" button!)
Did you restart your phone?
ny difference.
ffset?
tton? (Don't use the "PC >>> Phone" button!)
o Did you install MPT first? Is the phone reco
o Is the phone recognized as "Motorola USB Modem" when you first plug it in?
o Does Windows recognize that there is any type of USB device plugged in? Check the device manager.
o Did you try installing PST? That sometimes works. I can't tell you where to get it, though, as it's not
freeware.
o Have you tried manually installing the drivers? Go to Control Panel > Add New Hardware > Select
from List > Have Disk and point to drv/p2k.inf in the P2Kman folder.
• I uploaded my edited gain_table.bin to my phone and I d
o
o Was the value you changed the offset
o
o Did
o
o
• I uploaded the seem to my phone and I don't notice a
o Did you change the correct bit of the correct o
o Did you save the seem before you uploaded it?
o Did you enter the correct seem and record number in P2Kman properly?
o Did you use the "Upload seem" bu
o Did you restart your phone?
o Was your change Engineering, AIM, IM, Mobile QQ, Videos, Bluetooth, or Quick Menu?
 If so, did you check your mma_ucp and mma_dcp files? See the section "Activating Menu
Items for Special Features" for more info.
Asked Questions:Frequently
st seem 0032, offset 02, bit 1. Unfortunately, this will likely cause you to lose manual
network selection.
r
we need to remove all
th ce your mma files. If you have a TRIPLETS phone
(V
files. If you have a V551, use these V551 mma files. These mma
• When I have my bluetooth headset paired with my phone, it uses a default ringtone instead of my
custom one. How do I get it to use my custom ringtone? You can't. Sorry. That's a Motorola bug.
• I enabled advanced network menus, but manual network selection doesn't show up. How do I enable
it? Adjust seem 0032, offset 02, bit 1. Unfortunately, this will likely cause your voicemail indicator to act up and
you will receive text messages from ^@ and _@ whenever you get a voicemail or check it.
• I keep getting wierd text messages from ^@ and _@ and/or my voicemail indicator is always on. How
do I fix this? Adju
• How do I unbrand my phone without flexing? It's not difficult. First, you'll probably want to set the oute
LCD to the Motorola icon instead of the custom text, turn the custom startup/shutdown animations off in favor
of the Motorola OEM ones, and turn off the custom startup/shutdown sounds. Now,
ose pesky branded menus. You'll need to repla
300/400/500/600) use these
Vxxx mma
files have all menus in them and no branding. Back up your original mma files and upload these new ones to
/a/system/ using P2Kman. Reset the file attribute on mma_dcp to "4" ... the attribute for mma_ucp stays "0".
Next (back it up first) delete the file /a/DL_DB_INET_RECORDS if it is on your phone. This file contains the
"Shop Ringtones," "Shop Graphics," and "Shop Games & Apps" menus that show up in various places. Finally,
(back it up first) replace /a/mib_op_greet with the
Motorola OEM one so that when you startup the WAP

Motorola RAZR MAXX Specifications

General

Brand	Motorola
Model	RAZR MAXX
Category	Cell Phone
Language	English