Motorola RAZR MAXX Personalization Guide

Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
(Volume 1 - Primary Mods)
V3X Personalization Guide-V2-5-eb-v1-061205.doc 82 of 227
ebentley
Original V3x F&B3 V3x Profile Modded V3x F&B3 V3x Profile
[FB3 Profile]
RamDld=V3x (0682).ldr
ID=R252211LD_V3x
UseLdr=1
Addr=08000000
Jump=08000010
[Code Groups]
;BOOT=10000000-1000FFFF
;PDS=10010000-1001FFFF
;CG1=10040000-118DA4C7
CG2=11DC0000-138BFFFF
CG4=13BC0000-1
CG5=1190C4C8-11DBF7FF
CG8=13F40000-13F7FFFF
CG15=139
ID=R252211LD_V3x
UseLdr=1
Addr=08
3F3FFFF
C0000-13BBFFFF
CG17=118DA4C8-1190C4C7
CG18=11DBF800-11DBFFFF
[FB3 Profile]
RamDld=V3x (0682).ldr
000000
Jump=08000010
[Code Groups]
BOOT=10000000-1000FFFF
PDS=10010000-1001FFFF
CG1=10040000-118DA4C7
CG2=11DC0000-138BFFFF
CG5=1190C4C8-1
CG8=13F40000-13F7FFFF
CG4=13BC0000-13F3FFFF
1DBF7FF
CG15=139C0000-13BBFFFF
CG17=118DA4C8-1190C4C7
CG18=11DBF800-11DBFFFF
But before each of the PD
& Backup. Now in the profile section you will have two profiles with the name Motorola V3x. one
original one (from the backup file if it is in the same directory) and one is the one you've modified.
BOOT, PDS, and CG1 entries that are now selectable for backup in t
can now back up everyth
full backup, know that th
only be restored to the original phone.
S, Boot and CG1 entries, there is a ";" symbol, just remove it, save the file and restart Flash
of them is the
You will also see the
he F&B3 main screen (See figure below) and you
ing from the V3x including CG1 and the BOOT Section and the PDS. Note. If you do this
e PDS is specific to each phone, therefore a full backup that includes the PDS should

Motorola RAZR MAXX Specifications

General

Brand	Motorola
Model	RAZR MAXX
Category	Cell Phone
Language	English