118 Section 2I: Using the microSD Card
3. Replace the battery and the back cover.
Removing the microSD Card
To remove the microSD card from your phone:
1. With your phone powered off, remove the back cover
and then remove the battery.
2. Gently slide out the microSD card from the cardholder.
3. Replace the battery and the back cover.
Note:
Make sure your battery is fully charged before using the
microSD card. Your data may become damaged or unusable if
the battery runs out while using the microSD card.
Be sure to use only recommended microSD cards (64MB—
2GB). Using non-recommended microSD cards could cause
data loss and damage your phone.
Note:
DO NOT remove your memory card while your phone is using
it or writing files on it. Doing so will result in loss or damage
of data.
To Next Page
Loading...
Need help?
General
