Introduction Installation Troubleshooting Glossary License
SBV5220 VoIP Cable Modem User Guide 17
Setting Up a USB Driver in Windows 2000
1 Insert the SBV5220 VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers
and must be inserted and read by the PC before you connect the Motorola VoIP cable modem to the PC.
2 Connect the Motorola VoIP cable modem to your computer with a USB cable. For further instructions, see
“Cabling and Startup for a Single User” on page 10. A few seconds after you complete the USB connection,
the Found New Hardware Wizard window is displayed:
3 Click Next. The following window is displayed:
Be sure “Search for a suitable driver for my device” is selected.
Although your Motorola VoIP cable modem model number may be different than in the images in this
guide, the procedure is the same.
To Next Page
Loading...
Need help?
General