Introduction Installation Troubleshooting Glossary License
SBV5220 VoIP Cable Modem User Guide 23
6
Select the adapter to be used for the SBV5220 VoIP cable modem connection and then click Add. The Select
Network Component Type window is displayed:
7 Select the Protocol option and click Add. The Select Network Protocol window is displayed:
8 Click Microsoft in the Manufacturers section and click TCP/IP in the Network Protocol section of Select
Network Protocol window.
9 Click OK.
10 Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose the one for the Ethernet
card or USB port connected to the Motorola VoIP cable modem.
To Next Page
Loading...
