ABOUT THIS GUIDE
Introduction
The SE4750 Integration Guide discusses the theory of operation, installation, and specifications of the engine, and
how to integrate the engine into data capture devices.
Chapter Descriptions
This guide includes the following topics:
•
Chapter 1, Getting Started provides an overview of the engine and the theory of operation.
•
Chapter 2, Installation explains how to install the engine, including information on mounting, housing design,
optical, grounding, ESD, and environmental considerations.
•
Chapter 3, Specifications provides technical specifications for the engine, including decode ranges.
•
Chapter 4, Electrical Interface includes signal information and connector drawings.
•
Chapter 5, Control Interface describes the SE4750’s bi-directional control interface.
•
Chapter 6, Application Notes describes SE4750 operating modes.
•
Appendix A, Register Settings provides information on register settings for the engine.
NOTE This guide provides general instructions for the installation of the engine into a customer's device.
Motorola recommends that an opto-mechanical engineer perform an opto-mechanical analysis prior to
integration.
To Next Page
Loading...
