x SE4750 Integration Guide
Notational Conventions
This document uses the following conventions:
•
Italics are used to highlight chapters and sections in this and related documents
•
bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential
•
Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
Related Documents
•
PL3307 Decoder Integration Guide, p/n 72E-149624-xx
•
The I
2
C-Bus Specification, Version 2.1,
http://www.semiconductors.philips.com/acrobat/literature/9398/39340011.pdf
•
Aptina AR0134 (mono) 1/3-inch CMOS Digital Image Sensor Datasheet, http://www.aptina.com
To receive a copy of this datasheet, register with Aptina at: http://www.aptina.com/extranet/register.jsp
•
Molex connector specification, 54809 Series, http://www.molex.com
•
Kyocera connector specification, 6283 Series, http://global.kyocera.com
NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note
will not result in physical harm to the reader, equipment or data.
CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage may
occur.
WARNING! This symbol indicates that if this information is ignored the possibility that serious personal
injury may occur.
To Next Page
Loading...
