How to fix can’t see the Motorola Symbol CS3000 Scanner drive?
If you can’t see the Motorola Scanner drive after connecting the scanner to the host, it might be mapping to a drive already in use. Use Windows’ map drive function to assign a different drive letter to the scanner.
Why Motorola Symbol CS3000 Scanner laser is on, but not decoding bar code?
If your Motorola Scanner's laser is on but it's not decoding bar codes, here's what to check: * First, make sure your scanner is set up to read the specific type of bar code you're scanning. * Next, examine the bar code itself to ensure it's clear and readable. If possible, try scanning known good test bar codes of the same type. * Finally, adjust the distance between the scanner and the bar code; move either closer or further away.
Why Motorola Symbol CS3000 Scanner LED turns solid red?
If the Motorola Scanner LED turns solid red briefly, it means the battery is low. To resolve this, charge the scanner's battery.
What to do if Motorola Scanner emits long beeps for 5 seconds?
If your Motorola Scanner emits long beeps for 5 seconds after scanning a bar code, it indicates that the memory is full. To fix this, download the bar code data to the host device and then clear the scanner's memory.
Why Motorola Symbol CS3000 does not fully charge?
If the Motorola Scanner does not fully charge, it might be because you're trying to charge it using a non-powered USB hub. Connect the scanner to a powered USB hub (5V, 500mA max) to resolve this issue.
Overview of scanner setup, operation, and troubleshooting procedures.
Identifies scanner buttons, LEDs, and ports for user interaction and status.
Details USB and Bluetooth host connection types for data transfer and communication.
Instructions for unpacking the scanner and description of the charging cradle.
Procedures for charging the scanner's battery via USB cable or cradle.
Explains the meaning of the scanner's LED indicator during charging operations.
Overview of connecting the scanner to a host computer.
Instructions for connecting the scanner to a host PC via USB cable.
Details Bluetooth connection profiles: Serial Port Profile (SPP) and HID.
Provides examples for pairing the scanner with different host devices.
Guide for pairing the scanner to a PC via Bluetooth HID profile.
Guide for pairing the scanner to a PC via Bluetooth SPP profile.
Guide for pairing with a Windows Mobile device via Bluetooth HID.
Guide for pairing with a Windows Mobile device via Bluetooth SPP.
Instructions for unpairing and removing the scanner from a host device list.
Bar codes used for entering PINs during Bluetooth pairing.
Steps and options for initial scanner configuration.
Bar code to save current scanner configuration settings permanently.
Methods for deploying configurations to multiple scanners efficiently.
Instructions for modifying scanner settings via the Config.ini file.
Table detailing parameters available for the Config.ini file.
Overview of scanning procedures and beeper/LED definitions.
Instructions on how to aim and scan bar codes for successful data capture.
Methods for transferring scanned data from the scanner to a host device.
Explanation of scanner feedback via LEDs and beepers.
Table defining LED feedback for various scanner states and operations.
Table defining beeper feedback for various scanner states and operations.
Lists the default settings for user preference parameters.
Procedures for resetting scanner to factory defaults.
Procedures for setting the scanner's date and time using bar codes.
Bar codes for entering specific numeric date and time values.
Bar code to clear all scanned bar code data from the scanner.
Options to adjust beeper volume and tone.
Bar code to mute or unmute the scanner's beeper.
Various scanner operational settings.
Option to transmit a 'NR' message when a bar code is not read.
Settings for Bluetooth pairing, profiles, and unpairing.
Bar code to disable all symbologies for simplified programming.
Setting decode security levels for linear bar codes.
Enables scanning bar codes in both directions for improved decoding.
Settings related to data transmission, including code ID characters.
Settings for appending prefix and suffix values to scanned data.
Defines how scanned data is transmitted with prefixes/suffixes.
Bar codes to send scanner firmware, Bluetooth, and scan engine versions.
Bar code to save all current scanner configuration selections.
Lists the default settings for various symbologies.
Options for enabling/disabling UPC/EAN family symbologies.
Options for decoding supplemental bar codes with UPC/EAN.
Settings for custom user-defined supplemental bar code prefixes.
Controls for transmitting check digits and preamble characters for symbologies.
Options to convert UPC-E/E1 data to UPC-A format.
Enables EAN-8 zero extension for EAN-13 compatibility.
Selects format for Bookland EAN data (ISBN-10 or ISBN-13).
Sets decode security levels for UPC/EAN bar codes.
Options for enabling/disabling, and setting lengths for Code 128.
Options for Code 39, Trioptic, conversion, prefix, lengths, and check digits.
Options for enabling/disabling, and setting lengths for Code 93.
Options for Code 11, lengths, check digits, and transmit digits.
Options for I2of5, lengths, check digits, and transmit digits.
Options for enabling/disabling, and setting lengths for Discrete 2 of 5.
Options for enabling/disabling Chinese 2 of 5.
Options for Codabar, lengths, CLSI editing, and NOTIS editing.
Options for MSI, lengths, check digits, and algorithm.
Options for enabling/disabling GS1 DataBar types and conversion.
Bar codes for entering specific numeric values for parameters.
Bar code to cancel a programming sequence or correct an entry.
Guidelines for cleaning the scanner's scan window to ensure accuracy.
Guidance on diagnosing and resolving common scanner issues.
Table of common problems, possible causes, and solutions for the scanner.
Detailed technical specifications of the scanner.
Table detailing scanner specifications like battery, decode capability, and environment.
Diagram showing scanner performance based on distance and symbol size.
Table listing default settings for user preferences and symbologies.
Table listing bar code types and their corresponding hexadecimal values.
Table mapping code characters to specific symbology types.
Information on AIM code identifiers including characters and modifiers.
Table detailing modifier characters for symbology data transmission.
Explanation of GS1-128 data conventions and scanner behavior.
Instructions for appending prefixes and suffixes to scanned data.
Table mapping scan values to ASCII characters and keystrokes.
Examples of common bar code symbologies for testing.
To Next Page
General
