Programming Reference B - 7
Setting Prefixes and Suffixes
To append a prefix and suffixes to the decode data:
1. Set the Scan Data Transmission Format (parameter 0xE2) to the desired option.
2. Enter the required value(s) for Prefix (0x69), Suffix1 (0x68) or Suffix2 (0x6A) using the hex values for the
desired ASCII value from Table B-6.
Table B-6
Character Equivalents
Scan Value Hex Value
Full ASCII Code 39
Encode Char.
Keystroke
1000 00h %U CTRL 2
1001 01h $A CTRL A
1002 02h $B CTRL B
1003 03h $C CTRL C
1004 04h $D CTRL D
1005 05h $E CTRL E
1006 06h $F CTRL F
1007 07h $G CTRL G
1008 08h $H CTRL H
1009 09h $I CTRL I
1010 0Ah $J CTRL J
1011 0Bh $K CTRL K
1012 0Ch $L CTRL L
1013 0Dh $M CTRL M
1014 0Eh $N CTRL N
1015 0Fh $O CTRL O
1016 10h $P CTRL P
1017 11h $Q CTRL Q
1018 12h $R CTRL R
1019 13h $S CTRL S
1020 14h $T CTRL T
1021 15h $U CTRL U
1022 16h $V CTRL V
1023 17h $W CTRL W
To Next Page
Loading...
Need help?
General
