Motorola Symbol CS3000 Series User Manual

4 - 28 Symbol CS3000 Series Scanner Product Reference Guide
Code 93
Enable/Disable Code 93
Parameter # 0x09
To enable or disable Code 93, scan the appropriate bar code below.
Enable Code 93
(0x01)
*Disable Code 93
(0x00)
Set Lengths for Code 93
Parameter # L1 = 0x1A, L2 = 0x1B
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 93 to any length, one or two discrete lengths, or lengths within a specific
range.
One Discrete Length - Select this option to decode only codes containing a selected length. For example, select
Code 93 One Discrete Length, then scan the bar codes 1, 4 from Numeric Bar Codes on page 4-48 to limit the
decoding to Code 93 symbols containing 14 characters. To change the selection or cancel an incorrect entry, scan
Cancel on page 4-50.
Code 93 - One Discrete Length

Motorola Symbol CS3000 Series Specifications

General

Brand	Motorola
Model	Symbol CS3000 Series
Category	Scanner
Language	English