3 - 2 Symbol CS3000 Series Scanner Product Reference Guide
User Preferences Default Parameters
Table 3-1 lists the defaults for user preference parameters. To change any option, scan the appropriate bar code(s)
provided in this chapter.
NOTE See Appendix A, Standard Default Parameters for all default parameters.
Table 3-1
User Preferences Default Table
Parameter
Parameter Number
(Hex)
Factory Default
Page
Number
Reset N/A
3-4
Reset Factory Defaults N/A
3-4
Set Date N/A
3-5
Set Time N/A
3-5
Cancel Date and Time Settings N/A
3-5
Clear Data N/A
3-7
Beeper Volume 0x8C Medium
3-8
Beeper Tone 0x91 Medium Frequency
3-9
Mute Beeper N/A Do Not Mute
3-10
Scan Angle 0xBF Wide (47°)
3-11
Transmit “No Read” Message 0x5E Disable
3-12
Bluetooth Unpair N/A
3-13
Bluetooth HID Profile N/A
3-13
Bluetooth Serial Port Profile (SPP) N/A
3-13
Disable All Symbologies N/A
3-14
Linear Code Type Security Levels 0x4E 1
3-15
Bi-directional Redundancy 0x43 Disable
3-16
Data Options
Transmit Code ID Character 0x2D None
3-17
Prefix/Suffix Values
Prefix
Suffix 1
Suffix 2
0x69
0x68
0x6A
NULL
LF
CR
3-18
Scan Data Transmission Format 0xEB Data as is
3-19
Send Firmware Version N/A
3-21
To Next Page
Loading...
Need help?
General
