Symbologies 4 - 27
Enable/Disable Code 39 Full ASCII
Parameter # 0x11
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable
or disable Code 39 Full ASCII, scan the appropriate bar code below.
See Table B-6 on page B-7 for mapping Code 39 characters to ASCII values.
Enable Code 39 Full ASCII
(0x00)
*Disable Code 39 Full ASCII
(0x00)
NOTE You cannot enable Trioptic Code 39 and Code 39 Full ASCII simultaneously. If the scanner issues an error
beep when enabling Code 39 Full ASCII, disable Trioptic Code 39 and try again.
To Next Page
Loading...
