About This Guide
Introduction
The Symbol CS3000 Series Scanner Product Reference Guide provides general instructions for setting up,
operating, maintaining, and troubleshooting the scanner. The Symbol CS3000 series scanner is available in the
following configurations:
•
CS3000 - USB (batch), 0.5 GB Flash
•
CS3070 - USB (batch) and Bluetooth, 0.5 GB Flash
Each scanner includes a USB host cable. A charging cradle is also available for mounting, charging, and host
connection.
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started provides a product overview and describes how to charge, connect, and configure
the scanner.
•
Chapter 2, Scanning provides instructions for how to scan bar codes and send the data to a host, as well as
beeper and LED definitions.
•
Chapter 3, User Preferences describes each user preference feature and provides the programming bar
codes for selecting these features for the scanner. It also includes wireless communication parameters and
commonly used bar codes to customize how data is transmitted to the host device.
•
Chapter 4, Symbologies describes all symbology features and provides the programming bar codes for
selecting these features.
•
Chapter 5, Maintenance and Technical Specifications provides information on how to care for the scanner,
troubleshooting, and technical specifications.
•
Appendix A, Standard Default Parameters provides a table of all host devices and miscellaneous scanner
defaults.
•
Appendix B, Programming Reference provides a table of AIM code identifiers, ASCII character conversions,
and keyboard maps.
To Next Page
Loading...
Need help?
General
