Symbologies 4 - 43
Set Lengths for MSI
Parameter # L1 = 0x1E, L2 = 0x1F
The length of a code refers to the number of characters (i.e., human readable characters) the code contains, and
includes check digits. Set lengths for MSI to any length, one or two discrete lengths, or lengths within a specific
range. See Table B-6 on page B-7 for ASCII equivalents.
One Discrete Length - Select this option to decode only codes containing a selected length. For example, select
MSI Plessey One Discrete Length, then scan 1, 4, to decode only MSI Plessey symbols containing 14
characters. Select the length using the bar codes from Numeric Bar Codes on page 4-48. To change the selection
or cancel an incorrect entry, scan Cancel on page 4-50.
MSI - One Discrete Length
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. For example,
select MSI Plessey Two Discrete Lengths, then scan 0, 6, 1, 4, to decode only MSI Plessey symbols containing 6
or 14 characters. Select lengths using the bar codes from Numeric Bar Codes on page 4-48. To change the
selection or cancel an incorrect entry, scan Cancel on page 4-50.
MSI - Two Discrete Lengths
Length Within Range - Select this option to decode codes within a specified range. For example, to decode MSI
symbols containing between 4 and 12 characters, first scan MSI Length Within Range, then scan 0, 4, 1 and 2
(include a leading zero for single digit numbers). Select lengths using the bar codes from Numeric Bar Codes on
page 4-48. To change the selection or cancel an incorrect entry, scan Cancel on page 4-50.
MSI - Length Within Range
Any Length - Scan this option to decode MSI Plessey symbols containing any number of characters.
MSI - Any Length
NOTE Selecting this option may lead to misdecodes for MSI codes.
To Next Page
Loading...
Need help?
General
