Motorola Symbol CS3000 Series - I 2 of 5 Check Digit Verification; Transmit I 2 of 5 Check Digit

4 - 36 Symbol CS3000 Series Scanner Product Reference Guide
I 2 of 5 Check Digit Verification
Parameter # 0x31
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified
algorithm, either USS (Uniform Symbology Specification), or OPCC (Optical Product Code Council).
*Disable
(0x00)
USS Check Digit
(0x01)
OPCC Check Digit
(0x02)
Transmit I 2 of 5 Check Digit
Parameter # 0x2C
Scan one of the following bar codes to select whether to transmit data with or without the check digit.
Transmit I 2 of 5 Check Digit (Enable)
(0x01)
*Do Not Transmit I 2 of 5 Check Digit (Disable)
(0x00)