Motorola Symbol CS3000 Series - Bi-directional Redundancy

3 - 16 Symbol CS3000 Series Scanner Product Reference Guide
Linear Security Level 3
The scanner must read code types other than the following twice before decoding. It must read the following codes
three times:
Linear Security Level 3
(0x03)
Linear Security Level 4
The scanner must read all code types three times before decoding.
Linear Security Level 4
(0x04)
Bi-directional Redundancy
Parameter # 0x43
This parameter is only valid when a Linear Code Type Security Level is enabled. When this parameter is
enabled, the scanner must scan a bar code successfully in both directions (forward and reverse) before
decoding.
Enable Bi-directional Redundancy
(0x01)
*Disable Bi-directional Redundancy
(0x00)
Code Type Length
MSI 4 or less
D 2 of 5 8 or less
I 2 of 5 8 or less