Motorola Symbol CS3000 Series User Manual

4 - 2 Symbol CS3000 Series Scanner Product Reference Guide
Symbology Default Parameters
Table 4-1 lists the defaults for all symbologies parameters. To change any option, scan the appropriate bar code(s)
in this chapter.
NOTE See Appendix A, Standard Default Parameters for all default parameters.
Table 4-1 Factory Default Table
Parameter
Parameter Number
(Hex)
Factory Default
Page
Number
UPC/EAN
UPC-A 0x01 Enable 4-5
UPC-E 0x02 Enable 4-5
UPC-E1 0x0C Disable 4-6
EAN-8 0x04 Enable 4-6
EAN-13 0x03 Enable 4-7
Bookland EAN 0x53 Disable 4-7
Decode UPC/EAN Supplementals 0x10 Ignore 4-8
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
0xF1 0x43
0xF1 0x44
4-12
Decode UPC/EAN Supplemental Redundancy 0x50 7 4-12
Transmit UPC-A Check Digit 0x28 Enable 4-13
Transmit UPC-E Check Digit 0x29 Enable 4-13
Transmit UPC-E1 Check Digit 0x2A Enable 4-14
UPC-A Preamble 0x22 System Character 4-14
UPC-E Preamble 0x23 System Character 4-15
UPC-E1 Preamble 0x24 System Character 4-16
Convert UPC-E to A 0x25 Disable 4-17
Convert UPC-E1 to A 0x26 Disable 4-17
EAN-8 Zero Extend 0x27 Disable 4-18
Bookland ISBN Format F1h 40h ISBN-10 4-19
UPC/EAN Security Level 0x4D 0 4-20
UCC Coupon Extended Code 0x55 Disable 4-21

Motorola Symbol CS3000 Series Specifications

General

Brand	Motorola
Model	Symbol CS3000 Series
Category	Scanner
Language	English