Motorola Symbol CS3000 Series User Manual

Chapter 2 Scanning
Introduction
This chapter provides instructions for how to scan bar codes and send the data to a host. Beeper and LED
definitions are also included.
Scanning
See Chapter 1, Getting Started to install and program the scanner. To scan:
1. Aim the scanner at the bar code.
2. Press the scan (+) button.
Figure 2-1 Scanning
3. Ensure the scan line crosses every bar and space of the symbol.
012345
WRONG
012345
RIGHT

Motorola Symbol CS3000 Series Specifications

General

Brand	Motorola
Model	Symbol CS3000 Series
Category	Scanner
Language	English