4 - 40 Symbol CS3000 Series Scanner Product Reference Guide
Set Lengths for Codabar
Parameter # L1 = 0x18, L2 = 0x19
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specific
range.
One Discrete Length - Select this option to decode only codes containing a selected length. For example, select
Codabar One Discrete Length, then scan 1, 4, to decode only Codabar symbols containing 14 characters. Select
the length using the bar codes from Numeric Bar Codes on page 4-48. To change the selection or cancel an
incorrect entry, scan Cancel on page 4-50.
Codabar - One Discrete Length
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. For example,
select Codabar Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only Codabar symbols containing 6 or 14
characters. Select lengths using the bar codes from Numeric Bar Codes on page 4-48. To change the selection or
cancel an incorrect entry, scan Cancel on page 4-50.
Codabar - Two Discrete Lengths
Length Within Range - Select this option to decode a code within a specified range. For example, to decode
Codabar symbols containing between 4 and 12 characters, first scan Codabar Length Within Range, then scan
0, 4, 1 and 2 (include a leading zero for single digit numbers). Select lengths using the bar codes from Numeric Bar
Codes on page 4-48. To change the selection or cancel an incorrect entry, scan Cancel on page 4-50.
Codabar - Length Within Range
Any Length - Scan this option to decode Codabar symbols containing any number of characters.
Codabar - Any Length
To Next Page
Loading...
Need help?
General
