Motorola Symbol CS3000 Series - Enable;Disable GS1-128 (Formerly UCC;EAN-128); Enable;Disable ISBT 128; Lengths for Code 128

4 - 22 Symbol CS3000 Series Scanner Product Reference Guide
Enable/Disable GS1-128 (formerly UCC/EAN-128)
Parameter # 0x0E
To enable or disable GS1-128, scan the appropriate bar code below. See Appendix B, Programming Reference for
details on GS1-128 (formerly UCC/EAN-128).
*Enable GS1-128
(0x01)
Disable GS1-128
(0x00)
Enable/Disable ISBT 128
Parameter # 0x54
To enable or disable ISBT 128, scan the appropriate bar code below.
*Enable ISBT 128
(0x01)
Disable ISBT 128
(0x00)
Lengths for Code 128
No length setting is required for Code 128.