Symbologies 4 - 37
Convert I 2 of 5 to EAN-13
Parameter # 0x52
This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To
accomplish this, first enable I 2 of 5, set one length to 14, and include a leading zero and a valid EAN-13 check
digit in the code.
Convert I 2 of 5 to EAN-13 (Enable)
(0x01)
*Do Not Convert I 2 of 5 to EAN-13 (Disable)
(0x00)
Discrete 2 of 5
Enable/Disable Discrete 2 of 5
Parameter # 0x05
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Enable Discrete 2 of 5
(0x01)
*Disable Discrete 2 of 5
(0x00)
To Next Page
Loading...
