Motorola Symbol CS3000 Series User Manual

1 - 24 Symbol CS3000 Series Scanner Product Reference Guide
ScanParam Variable Any scan engine parameter. Multiple
entries are allowed. Sent after reset or
when engine is powered.
For example:
ScanParam=0xf0,0x00,0x01
ScanParam=0xee,0x01
ScanParam=0x38,0x00
<none>
Sleep Integer Time in seconds before the scanner enters
sleep mode when no activity is detected.
120 (2 minutes)
BTSleep Integer Time in seconds before the scanner enters
sleep mode while paired to another
Bluetooth device when no activity is
detected.
600 (10 minutes)
ButtonPlus Enabled
Disabled
Enable or disable the Plus button. Enabled
ButtonMinus Enabled
Disabled
Enable or disable the Minus button. Enabled
ButtonBT Enabled
Disabled
Enable or disable the BT button. Enabled
WakeUpLED Enabled
Disabled
Enable or disable the wake-up LEDs. Enabled
LEDBlue Enabled
Disabled
Enable or disable the blue LED for normal
operation and wake up.
Enabled
LEDGreen Enabled
Disabled
Enable or disable the green LED for
normal operation and wake up
Enabled
LEDRed Enabled
Disabled
Enable or disable the red LED for normal
operation and wake up.
Enabled
LEDAmber Enabled
Disabled
Enable or disable the amber LED for
normal operation and wake up.
Enabled
CodeID Enabled
Disabled
Enable or disable saving CodeID in the
scanned bar codes file. See
Code Type
IDs on page B-1
.
Enabled
ScanLED Enabled
Disabled
Enable or disable the LEDs that illuminate
while the laser scanner is active.
Enabled
Table 1-1 Config.ini File Content (Continued)
Parameter Values Description Default

Motorola Symbol CS3000 Series Specifications

General

Brand	Motorola
Model	Symbol CS3000 Series
Category	Scanner
Language	English