Getting Started 1 - 9
8. Click Finish to complete the pairing. The device appears in the Bluetooth Devices window.
Figure 1-12
Bluetooth Devices Window
9. Select the device, then click Add... The CS3070 issues a two-tone beep and the Bluetooth button blinks slowly
to indicate that the scanner paired with the host.
PC SPP Pairing Example
For CS3070 scanners, to pair to a Bluetooth-enabled PC or laptop via SPP:
1. Press the scan button (+) to wake the scanner.
2. Scan Bluetooth Serial Port Profile (SPP) on page 3-13. The Bluetooth button starts blinking quickly to indicate
that the scanner is discoverable by the host.
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
NOTE If the host does not support Bluetooth communication, a third-party Bluetooth adapter is required.
To Next Page
Loading...
