Specifications 3 - 7
Vibration Unpowered SE4750 withstands a random vibration along each of the X,
Y, and Z axes for a period of one hour per axis (6 G rms), defined as
follows:
20 to 80 Hz Ramp up at 0.04 G
2
/Hz at 3 dB/octave
80 to 350 Hz 0.04 G
2
/Hz
350 Hz to 2 kHz Ramp down at 0.04 G
2
/Hz at 3 dB/octave
ESD ± 2 kV HBM @ connector
Laser Safety Class CDRH / IEC Class 2
LED Class IEC Class 1M
Chassis Temperature
Operating
Storage
-30º to 60º C / -22º to 140º F
-40º to 70º C / -40º to 158º F
See
Thermal Considerations on page 2-2
for more information.
Humidity 95% RH, non-condensing at 60º C
Maximum Engine Dimensions 11.8 mm H x 21.5 mm W x 16.3 mm D
0.46 in. H x 0.85 in.W x 0.64 in. D
Weight 8.0 grams (0.28 oz)
Electrical Interface 21 pin 0.3 mm pitch ZIF connector
See
Chapter 4, Electrical Interface
for more information.
Table 3-6
SE4750 Technical Specifications (Continued)
Item Description
NOTE Environmental and/or tolerance parameters are not cumulative. Motorola recommends a thermal analysis
if the application is subject to an extreme temperature environment.
To Next Page
Loading...
