Disassembly/Reassembly Procedures: Radio Disassembly – Detailed 5-9
3. After removing the battery door, remove battery from battery compartment as shown
in Figure 5-6. To remove battery, grasp the battery groove at the top of the battery and lift up the
battery.
Figure 5-6. Battery removal
4. Remove the self tapping screws from four corners of the back housing marked (a, b, c, d) by
using the 6IP Torx Plus as shown in Figure 5-7.
5. Remove the two machine screws in the battery compartment marked (e and f) by using the 6IP
Torx Plus as shown in Figure 5-7.
Figure 5-7. Self tapping screws and machining screws removal
NOTE
The battery cannot be removed bottom first.
To Next Page
Loading...
