6 Symbol CS3070
4. Select the CS3070 from the discovered
device list. The Bluetooth application may
prompt you to scan a passkey it generated,
or for you to create and then scan a pin.
5. Scan
Numeric Bar Codes on page 8
corresponding to the passkey, then scan
Enter on page 9.
The Bluetooth button blinks slowly to indicate
that the scanner paired with the host.
Unpairing
To unpair the scanner and host, press the
Bluetooth button. The Bluetooth button stops
blinking.
Note Bluetooth pairing suspends
temporarily while charging via a
USB cable. Disconnecting the cable
re-establishes the Bluetooth pairing.
Note To enter batch scanning mode, the
scanner cannot be paired to a
Bluetooth host (applies to CS3070
model only).
To Next Page
Loading...
Need help?
General
