Motorola Symbol DS9808 - Page 357

Standard Default Parameters A - 3
Miscellaneous Options
Transmit Code ID Character 2Dh None 4-48
Prefix Value 63h, 69h 7013 <CR><LF> 4-49
Suffix 1 Value
Suffix 2 Value
62h 68h
64h 6Ah
7013 <CR><LF> 4-49
Scan Data Transmission Format EBh Data as is 4-50
FN1 Substitution Values 67h 6Dh Set 4-51
Transmit “No Read” Message 5Eh Disable 4-52
Imaging Preferences
Operational Modes N/A N/A 5-4
Image Capture Illumination F0h 69h Enable 5-5
Gain / Exposure Priority for Snapshot Mode F1h 32h Autodetect 5-6
Snapshot Mode Timeout F0h 43h 0 (30 seconds) 5-7
Snapshot Aiming Pattern F0h 2Ch Enable 5-7
Image Cropping F0h 2Dh Disable 5-8
Crop to Pixel Addresses F4h F0h 3Bh;
F4h F0h 3Ch;
F4h F0h 3Dh;
F4h F0h 3Eh
0 top
0 left
479 bottom
751 right
5-9
Image Size (Number of Pixels) F0h 2Eh Full 5-10
Image Brightness (Target White) F0h 86h 180 5-11
JPEG Image Options F0h 2Bh Quality 5-11
JPEG Target File Size F1h 31h 160 kB 5-12
JPEG Quality and Size Value F0h 31h 65 5-12
Image Enhancement F1h 34h Off (0) 5-13
Image File Format Selection F0h 30h JPEG 5-14
Image Rotation F1h 99h 0 5-15
Bits per Pixel (BPP) F0h 2Fh 8 BPP 5-16
Signature Capture 5Dh Disable 5-17
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.