Standard Default Parameters A - 5
RS-232 Host Parameters
RS-232 Host Types Standard
1
7-6
Baud Rate 9600 7-8
Parity Type None 7-9
Data Bits 8-Bit 7-9
Check Receive Errors Enable 7-10
Hardware Handshaking None 7-10
Software Handshaking None 7-12
Host Serial Response Time-out 2 Sec 7-14
RTS Line State Low RTS 7-15
Beep on <BEL> Disable 7-15
Intercharacter Delay 0 msec 7-16
Nixdorf Beep/LED Options Normal Operation 7-17
Ignore Unknown Characters Send Bar Code 7-17
IBM 468X/469X Host Parameters
Port Address None Selected 8-4
Convert Unknown to Code 39 Disable 8-5
Ignore Beep Directive Honor
8-5
Ignore Configuration Directive Honor
8-6
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type IBM PC/AT& IBM PC
Compatibles
1
9-4
Country Types (Country Codes) North American 9-5
Ignore Unknown Characters Transmit 9-7
Keystroke Delay No Delay 9-7
Intra-Keystroke Delay Disable 9-8
Alternate Numeric Keypad Emulation Disable 9-8
Simulated Caps Lock
Disable 9-9
Caps Lock Override Disable 9-9
Table A-1
Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.
To Next Page
Loading...
