3.1
Operations in the Menu Screen
This section shows you the operations available in the menu screen and its instructions.
Table 3: Menu Pages Description
Menu Page Use the + or - button to perform the following actions:
Call Tone
Start or stop Call Tone transmission.
Monitor
Start or stop monitoring the air-wave. You can hear signals
transmitted on the channel setting of your radio. If there is no
signal, you can hear static.
Scan
Start or stop scanning the air-wave. Radio scans all the chan-
nels one after another. When a signal is detected, you hear the
signal on the speaker and the radio displays the channel of the
detected signal.
Adjust VOX/iVOX
/
To change the Voice Operated Transmission (VOX) setting,
select OFF or L1 to L3.
NOTE: L3 is the most sensitive setting for use in
quiet environments.
Adjust Roger Tone
Enable or disable the roger tone.
NOTE: Roger tone is a beep tone that you hear when
PTT is released.
Adjust Channel
(Channel number blinks)
Change the radio channel setting.
Adjust Code
(Code number blinks)
Change the radio code setting.
Adjust Auto Key Lock Change the Auto Key Lock setting.
Weather Radio (HOME) When the weather channel display is on (not blinking), use the
+ or - buttons to change speaker volume setting, or you can
use the Menu button to make the weather channel blink. When
the weather channel blinks, the + or - buttons to change the
weather channel setting.
Adjust Weather Alert
Turn weather alert feature on or off.
MN009246A01-AA
Chapter 3 : Navigating the Menu Pages
17
To Next Page
Loading...
Need help?
General
