4.9
Setting the Keypad Tones
You can enable or disable the speaker key tones. You hear the key tone each time you push a button.
Procedure:
1 Press the Menu/Lock button until the radio displays Keypad Tone icon.
The current on/off setting blinks.
2 To turn on or off keypad tones, press the + or - button.
3 To confirm and exit menu, press the PTT button
You can continue the set-up by pressing the Menu/Lock button.
NOTE: The following features are not disabled when the keypad tone feature is turned
off:
• Transmit timeout alert tone
• Call tone
• Low battery alert tone
• The transmitted talk confirmation tone
4.10
Transmitting a Talk Confirmation Tones
You can set your radio to transmit a unique tone when you finish transmitting, similar to saying “Roger”
or “Over” to let others know you are finished talking.
Procedure:
1 Press the Menu/Lock button until the radio displays Roger Tone icon.
The current setting blinks.
2 To turn the confirmation tone on or off, press the + or - button.
3 To confirm and exit menu, press the PTT button.
You can continue the set-up by pressing the Menu/Lock button.
4.11
Turning LED Flashlight On or Off
Procedure:
1 To turn the light on, press the Flashlight button.
2 To turn the light off, press the Flashlight button again.
NOTE: You can turn off the flashlight when not in use to conserve battery power.
MN009246A01-AA
Chapter 4 : Radio Usage
21
To Next Page
Loading...
Need help?
General
