36 August 20, 2003 6809471A67-O
Disassembly V150
Removing and Replacing the Keypad Keys
1. Remove the battery cover, battery, antenna, light guide, rear housing, and
transceiver board as described in the procedures.
2. Lift the keypad keys from the front housing as shown in Figure 16.
3. To replace, insert the keypad keys into the front housing, ensuring the keys
align properly with the openings in the front housing.
4. Replace the transceiver board, rear housing, light guide, antenna battery, and
battery cover as described in the procedures.
Removing the Flip Assembly
031800o
Figure 16. Removing the Keypad Keys
G
There are no Level 1 or 2 replaceable parts in the V150 telephone flip assembly. The
flip assembly is not removable from the front housing at Level 1 and 2 Service
Centers. Refer service to an authorized Level 3 or higher Center.
Keypad
Front Housing
To Next Page
Loading...
