Motorola V150 - Text Entry Utilities; Punctuation and Capitalization Control; Numerical Data Input Procedures

38 August 20, 2003 6809471A67-O
SIM Card and Identification V150
13. Repeat steps 1 - 10 but type 022# at step 6 to transfer second block of data to
the clone card.
14. Repeat steps 1 - 10 but type 025# at step 6 to transfer final block of data to the
clone card.
Creating a Master SIM Card
1. Remove the battery cover and battery from the customer’s one as described in
the procedures on
page 24.
2. Remove the customer’s SIM card.
3. Insert the transfer SIM card into the customer’s phone.
4. Replace the battery and battery cover as described in the procedures.
5. Press and hold , until Clone displays on the screen.
6. Using the keypad buttons, type 024# to copy the ’personality’ from the unit to
the transfer SIM card. Please wait displays on the screen.
7. When Clone displays on the screen, the transfer is complete and the Master
Transfer card is created.
Master Transfer
1. Remove the battery cover and battery from the replacement unit as described
in the procedures.
2. If required, remove the SIM card from the replacement unit.
3. Insert the Master Transfer Card into the replacement unit.
4. Replace the battery and battery cover as described in the procedures.
5. Press and hold , until Clone displays on the screen.
6. Using the keypad buttons, type 03# to download the data from the Master
Transfer Card to the replacement unit. Please wait displays on the screen.
7. When Clone displays on the screen, the download is complete.