6809490A38-O September 28, 2004 23
Level 1 and 2 Service Manual Disassembly
Removing and Replacing the Microphone
1. Remove the battery cover, battery, SIM card, antenna, rear housing, and the
transceiver PC board as described in the procedures.
2. Use plastic tweezers remove the microphone grommet.
3. Use the plastic tweezers to unplug the microphone from the transceiver board
as shown in Figure 11.
4. To replace, align the 2 microphone pins into the microphone contact holes.
Press the microphone firmly in place.
5. Replace the microphone grommet over the microphone.
6. Replace the transceiver PC board in the front housing, replace the rear
housing, SIM card, antenna, battery, and battery cover as described in the
procedures.
Figure 11. Removing and Replacing the Microphone
Plastic
Tweezers
Microphone
2 Microphone Pins
Microphone