Motorola V80 - Using a Bluetooth Wireless Connection

38 - Bluetooth
Using a Bluetooth Wireless Connection
To connect your phone to a headset accessory or handsfree
device:
Your phone displays a list of device(s) located within range of the
phone. If your phone is already connected to a device, your phone
lists the connected device and identifies it with a
\
(in use)
indicator.
To connect to a device, highlight the device name and press
*
(
+
).
Series of 4 tones, low to high audio link open (Headset
mode), active call (hands
free mode)
Ring tone incoming call
Single high tone pairing confirmation
Single low tone initiate voice activation
Dual high/low tone voice tag not recognised
Single high tone end call
Series of 4 tones, high to low audio link closed (Headset
mode), call ended (hands
free mode)
Fast high/low tone every
5 seconds (max. & min. volume
confirm beep)
no network/service
No tone power ON/OFF
Find the Feature
M
>

>
%
>
( *'
>
2!
>
/*' - $&%0
Audio Tone Headset Status
UG.V80.GSM.book Page 38 Wednesday, April 7, 2004 12:20 PM