34 June 22, 2006
Disassembly W220
PRELIMINARY
3. Completely disassemble the screw cover and screw cap as shown in Figure 26.
4. Sequentially remove 1-2-3-4 screws with T5 screwdriver as shown in Figure 27.
5. To replace, sequentilly fasten 1-2-3-4 screws with 9 Ncm torque moment and speed.
Figure 26. Disassembling the Screw Cover and Screw Cap
Figure 27. Removing screws
1
2
3
4
To Next Page
Loading...
