June 22, 2006 35
Level 1-2 Service Manual Disassembly
PRELIMINARY
6. To replace, put screw cover into the Housing B with a tweezer as shown in Figure 27.
7. To replace, put screw cap into the Housing B with a tweezer as shown in Figure 28.
8. Replace the speaker box, antenna carrier, PCBA, lower housing cover, battery, and battery
door as described in the procedures
Figure 28. Replacing the Screw Cover and Screw Cap
Figure 29. Replacing the Screw Cover and Screw Cap
To Next Page
Loading...
